Last updated: November 2026. Based on each city’s and county’s published ordinances and building department pages.
Before a new fence or driveway gate goes up, it pays to know your town’s rules. A fence that’s too tall in the front yard, or that blocks a driver’s view at a corner, can mean a variance hearing or tearing it out. Here’s whether you need a fence permit in Rome, GA, Floyd County and the other towns we work in most.
This is a plain-English summary, not legal advice. Rules change, and zoning districts, HOAs, historic districts and flood zones can add requirements. Always call the office listed before you build.
Quick reference
| Location |
Permit for a typical fence? |
Residential height limits |
Who to call |
| Rome and Floyd County (unincorporated) |
Building permit for fences 7 ft or taller; engineered footings 8 ft+ |
Single-family: 4 ft in yards next to a street; 6 ft side/rear |
Rome-Floyd Building Inspection, 607 Broad St., 706-236-4481 |
| Cartersville |
Call to confirm |
4 ft front (ornamental, not opaque); 8 ft side/rear |
City of Cartersville Planning & Development |
| Bartow County (unincorporated) |
Call to confirm |
Call to confirm |
Bartow County Community Development |
| Cedartown |
Yes, all fencing needs a fence permit |
Call to confirm |
Building Inspection, City Hall, 201 East Ave., 770-748-3220 ext. 3040 |
| Polk County (unincorporated) |
Call to confirm |
Call to confirm |
Polk County building/zoning office |
| Calhoun |
Call to confirm; no fence rule published |
Call to confirm |
Calhoun Building Inspection, 700 W. Line St., 706-602-5607 |
| Gordon County (unincorporated) |
Call to confirm |
Call to confirm |
Gordon County building/zoning office |
| Summerville |
Fences not over 7 ft are exempt from building permits (per city permit booklet) |
Call to confirm |
Summerville Building Inspection, 120 Georgia Ave., 706-859-0900 |
| Chattooga County (unincorporated) |
Call to confirm |
Call to confirm |
Chattooga County building office |
Rome and Floyd County
Rome and Floyd County share one Unified Land Development Code (ULDC) and one building inspection office. Under ULDC Article 4.2.5:
- Single-family residential: a fence or wall in any yard next to a street can’t exceed 4 feet. Side and rear yards can go to 6 feet. Corner lots have two street-facing yards, so both are limited to 4 feet.
- Agricultural-residential, office, commercial, multifamily and industrial: max 8 feet, and front-yard fences max 4 feet unless parallel to the building (agricultural and heavy industrial uses excepted).
- Setbacks: no minimum setback, but a fence can’t block visibility at street intersections or driveways.
- Permits: fences 7 feet or taller need a building permit; 8 feet or taller need engineered footings. Anything that doesn’t fit the ULDC needs a variance first.
- Historic districts: every fence must be approved by the Historic Preservation Commission first.
- Barbed wire is allowed where agriculture is the main use.
A gate is usually treated as part of the fence. Our ornamental driveway entrance gates often sit on columns set back from the road, which helps with sight lines. If the columns or gate go above the height limit, call first.
Cartersville (Bartow County)
Cartersville’s Zoning Ordinance Sec. 4.16 says:
- In residential and commercial districts, fences can’t exceed 4 feet in a front yard or 8 feet in a side or rear yard.
- Any fence in the front yard must be ornamental or decorative and not opaque, such as wrought iron, brick, stone, wood or split rail. Ornamental iron fits well here.
- Chain link in a front yard needs a variance.
- No fence can block vision or create a traffic hazard. Sec. 4.12 limits obstructions on corner lots to 3 feet inside a sight triangle measured 20 feet along each right-of-way line from the intersection.
We didn’t find a clear published permit trigger for residential fences, so call Planning & Development to confirm. Outside city limits, Bartow County rules apply.
Cedartown (Polk County)
The City of Cedartown requires a fence permit for all fencing under the city code’s fencing requirements. The city’s Fence Permit Application asks for material, linear footage, height and location. Fences in a historic district also need a Certificate of Appropriateness from the Historic Preservation Commission, and Sec. 54-65 of the city code caps historic-district fences at 4 feet in front yards and 6 feet in side and rear yards, with wrought iron listed as a permitted material. Contact Building Inspection at City Hall, 201 East Avenue, 770-748-3220 ext. 3040. Outside city limits, Polk County rules apply. Call to confirm height limits outside historic districts.
Calhoun (Gordon County)
We couldn’t find a published residential fence permit rule for the City of Calhoun. Fence-related rules are spread across the zoning, historic, floodplain and right-of-way sections. Call Building Inspection to confirm at 706-602-5607 (700 W. Line St.). Calhoun’s permit application asks contractors for a Georgia business license and contractor license. Outside city limits, Gordon County rules apply.
Summerville (Chattooga County)
Summerville’s building permit booklet lists fences not over 7 feet high as exempt from a building permit. Zoning rules on height and placement may still apply, so call to confirm with Building Inspection at 120 Georgia Avenue, 706-859-0900. Outside city limits, Chattooga County rules apply.
Corner lots and sight lines
Nearly every town has a rule against fences that block drivers’ views at intersections and driveways. Solid fences and columns are the usual problem. An open picket or ornamental iron design is often the easiest way to get privacy and security without blocking a sight line.
HOAs and deed restrictions
A city permit doesn’t override your HOA. Many neighborhoods around Rome and Cartersville have covenants on fence height, material, color and location. Get HOA approval in writing before you order a custom fence or gate.
Also check
- Property lines and easements: know where your line is. A survey is the safest way.
- Utilities: call Georgia 811 before you dig post holes.
- Flood zones: fences in a floodplain may need a flood area permit.
- Gate placement: set driveway gates back far enough for a vehicle to pull off the road while the gate opens. See our automatic gates page.
Custom fences and gates from Fabco
Since 1984, Fabco Fabrications has built custom fences, walkway gates and driveway gates in our shop for homes and farms in Rome, Floyd County, the communities we serve and Northeast Alabama. Every project is custom. Contact us to start yours. Call us at (706) 232-2642 or request a free quote.
Related guides: automatic gate safety (UL 325), wrought iron vs aluminum vs steel fence and Georgia deck and porch railing code.
FAQ
Do I need a permit for a fence in Rome, GA?
Under Rome-Floyd’s rules, fences 7 feet or taller need a building permit, and fences must meet the ULDC height limits. Call 706-236-4481 to confirm.
How tall can a front yard fence be in Rome?
4 feet in single-family residential districts. Side and rear yards can be 6 feet.
Do I need a permit for a fence in Cedartown?
Yes. The city requires a fence permit for all fencing.
Can I put a privacy fence in my front yard in Cartersville?
Front-yard fences must be ornamental and not opaque, max 4 feet, unless you get a variance.
Does my HOA have to approve my gate?
If your neighborhood has covenants, usually yes. A city permit doesn’t replace HOA approval.
Sources
Last updated: November 2026. Based on each city’s and county’s published ordinances and building department pages.
Before a new fence or driveway gate goes up, it pays to know your town’s rules. A fence that’s too tall in the front yard, or that blocks a driver’s view at a corner, can mean a variance hearing or tearing it out. Here’s whether you need a fence permit in Rome, GA, Floyd County and the other towns we work in most.
Quick reference
Rome and Floyd County
Rome and Floyd County share one Unified Land Development Code (ULDC) and one building inspection office. Under ULDC Article 4.2.5:
A gate is usually treated as part of the fence. Our ornamental driveway entrance gates often sit on columns set back from the road, which helps with sight lines. If the columns or gate go above the height limit, call first.
Cartersville (Bartow County)
Cartersville’s Zoning Ordinance Sec. 4.16 says:
We didn’t find a clear published permit trigger for residential fences, so call Planning & Development to confirm. Outside city limits, Bartow County rules apply.
Cedartown (Polk County)
The City of Cedartown requires a fence permit for all fencing under the city code’s fencing requirements. The city’s Fence Permit Application asks for material, linear footage, height and location. Fences in a historic district also need a Certificate of Appropriateness from the Historic Preservation Commission, and Sec. 54-65 of the city code caps historic-district fences at 4 feet in front yards and 6 feet in side and rear yards, with wrought iron listed as a permitted material. Contact Building Inspection at City Hall, 201 East Avenue, 770-748-3220 ext. 3040. Outside city limits, Polk County rules apply. Call to confirm height limits outside historic districts.
Calhoun (Gordon County)
We couldn’t find a published residential fence permit rule for the City of Calhoun. Fence-related rules are spread across the zoning, historic, floodplain and right-of-way sections. Call Building Inspection to confirm at 706-602-5607 (700 W. Line St.). Calhoun’s permit application asks contractors for a Georgia business license and contractor license. Outside city limits, Gordon County rules apply.
Summerville (Chattooga County)
Summerville’s building permit booklet lists fences not over 7 feet high as exempt from a building permit. Zoning rules on height and placement may still apply, so call to confirm with Building Inspection at 120 Georgia Avenue, 706-859-0900. Outside city limits, Chattooga County rules apply.
Corner lots and sight lines
Nearly every town has a rule against fences that block drivers’ views at intersections and driveways. Solid fences and columns are the usual problem. An open picket or ornamental iron design is often the easiest way to get privacy and security without blocking a sight line.
HOAs and deed restrictions
A city permit doesn’t override your HOA. Many neighborhoods around Rome and Cartersville have covenants on fence height, material, color and location. Get HOA approval in writing before you order a custom fence or gate.
Also check
Custom fences and gates from Fabco
Since 1984, Fabco Fabrications has built custom fences, walkway gates and driveway gates in our shop for homes and farms in Rome, Floyd County, the communities we serve and Northeast Alabama. Every project is custom. Contact us to start yours. Call us at (706) 232-2642 or request a free quote.
Related guides: automatic gate safety (UL 325), wrought iron vs aluminum vs steel fence and Georgia deck and porch railing code.
FAQ
Do I need a permit for a fence in Rome, GA?
Under Rome-Floyd’s rules, fences 7 feet or taller need a building permit, and fences must meet the ULDC height limits. Call 706-236-4481 to confirm.
How tall can a front yard fence be in Rome?
4 feet in single-family residential districts. Side and rear yards can be 6 feet.
Do I need a permit for a fence in Cedartown?
Yes. The city requires a fence permit for all fencing.
Can I put a privacy fence in my front yard in Cartersville?
Front-yard fences must be ornamental and not opaque, max 4 feet, unless you get a variance.
Does my HOA have to approve my gate?
If your neighborhood has covenants, usually yes. A city permit doesn’t replace HOA approval.
Sources