Railings & Stairs

ADA Handrail Requirements for Businesses and Churches in Rome, GA

ADA-compliant commercial stair handrail in Rome, GA

Last updated: November 2026. Reviewed against the 2010 ADA Standards for Accessible Design and the Georgia DCA state minimum codes list.

If you own a storefront, an office or a church in Rome or Northeast Alabama, your handrails have to meet more than the home code. Here’s a plain-English guide to ADA handrail requirements and what the commercial building code adds.

This is a plain-English summary, not legal or code advice. Your local building department and fire marshal have the final say. Always check with them before you build.

Which rules apply

  • 2010 ADA Standards for Accessible Design (U.S. Department of Justice) apply to places of public accommodation and commercial facilities. Handrails are covered in Section 505; stairs in 504; ramps in 405.
  • International Building Code (IBC), 2024 Edition with 2026 Georgia Amendments is Georgia’s mandatory commercial building code. Handrails are in Section 1014, guards in 1015.
  • Georgia accessibility rules: Georgia’s accessibility code, Safety Fire Commissioner Rule 120-3-20, adopts the 2010 ADA Standards for Accessible Design as the state’s minimum standard for covered public buildings and facilities.
  • Alabama: commercial projects follow the IBC adopted by the state and local jurisdiction; Alabama moves to the 2024 codes on Jan 1, 2027.

A note for churches: religious organizations are generally exempt from ADA Title III. But the building code still applies to new work and alterations, and the IBC has its own accessibility chapter (Chapter 11, referencing ICC A117.1). In practice, a new church stair or ramp rail should still be built to these dimensions. Ask your building official.

Quick reference: commercial and ADA handrails

Item Requirement Source
Height 34 to 38 in. to top of gripping surface, measured from nosings or ramp surface ADA 505.4; IBC 1014.2
Sides Both sides of stairs and ramps ADA 505.2
Continuity Continuous within the full length of each flight or ramp run; inside rail on switchback stairs continuous ADA 505.3
Wall clearance 1½ in. min. ADA 505.5
Round grip 1¼ to 2 in. outside diameter ADA 505.7.1
Non-round grip Perimeter 4 to 6¼ in., cross section 2¼ in. max ADA 505.7.2
Top extension, stairs 12 in. horizontal beyond the top riser ADA 505.10.2
Bottom extension, stairs Slope continues one tread depth beyond the bottom riser ADA 505.10.3
Ramp extensions 12 in. horizontal beyond top and bottom of ramp run ADA 505.10.1
Ramp handrails required Ramp runs with a rise greater than 6 in. ADA 405.8
Ramp slope 1:12 max ADA 405.2
Surface Smooth, no sharp or abrasive elements; rail must not rotate in fittings ADA 505.8, 505.9
Guards (open drop) 42 in. min. in commercial buildings IBC 1015.3

How this differs from a home railing

Home (IRC) Business or church (ADA/IBC)
Handrails One side, flights of 4+ risers Both sides of stairs and ramps
Extensions Not required 12 in. at top; one tread at bottom
Guard height 36 in. 42 in.
Ramps Rarely addressed Rails on any run rising more than 6 in.

The extensions catch most people off guard. A rail that stops at the top step looks finished, but it fails ADA. It also needs to return to a wall, guard or the walking surface so it doesn’t snag a sleeve or a cane.

Ramps

A ramp with a rise of more than 6 inches needs handrails on both sides. Ramps also need edge protection, typically a curb or barrier that keeps a wheelchair caster from slipping off the side (ADA 405.9). A lower rail can be designed into the railing to do this.

Churches and older buildings

Many churches and storefronts around Rome are older buildings where a full rebuild isn’t practical. When you alter a stair or entrance, the altered element generally has to comply to the extent technically feasible. A custom rail can often be fitted to an existing stair, with extensions and returns that blend into historic architecture instead of looking like a hospital rail.

Commercial railings from Fabco

Since 1984, Fabco Fabrications has built custom handrails and guardrails in our shop for businesses, churches and public buildings across Rome, Floyd County and Northeast Alabama. Every project is custom. See commercial metal fabrication, exterior stair rails and interior stair rails, or contact us. Call us at (706) 232-2642 or request a free quote.

Related guides: Georgia stair railing and handrail code and Georgia deck and porch railing code.

FAQ

What height is an ADA handrail?

34 to 38 inches to the top of the gripping surface.

Do ADA handrails have to be on both sides?

Yes, on stairs and ramps that are required to have handrails.

How far does an ADA handrail have to extend?

12 inches horizontally past the top riser and one tread depth past the bottom riser on stairs; 12 inches at both ends of a ramp.

Are churches required to follow the ADA?

Religious organizations are generally exempt from ADA Title III, but building codes still apply to new construction and alterations.

When does a ramp need handrails?

When the ramp run rises more than 6 inches.

What’s the difference between a handrail and a guard?

A handrail is for gripping. A guard keeps people from falling off an open edge. Commercial guards are 42 inches.

Sources